Performer RPM II Intake Manifold #71233 For 5.0L Small-Block Ford, Black Finish

The Edelbrock Performer 5.0 RPM II #71233 intake manifold for 1986-95 5.0L Mustang engines has shown significant gains in horsepower over existing designs in the 1500 to 6500 rpm range, and is ideally suited for street and strip applications. This manifold consists of a V-shaped crossover with an increasing cross-sectional area, which passes over to eight large tapered runners. Our 70mm throttle body is recommended (75mm will require port matching). 1994-95 Mustang engines require Throttle Body Adapter #38353 and Adapter Kit #8025. May not fit with stock hood of 1994-95 Mustangs, aftermarket hood recommended. The Edelbrock Performer 5.0 RPM II #71233 also features a durable black powder coated finish for long lasting protection and a distinctive look. For the ultimate "Made in USA" quality, every Edelbrock intake manifold is cast and machined in the USA.

Installation Notes:
• Recommended intake gasket: Edelbrock #7220
• Air valve location is 0.30" higher and 0.50" forward from stock
• Port exit dimensions: 1.16" x 2.0"
• Recommended cams: Ford SVO X-303 or Z-303.
• Overall height: 11.13"
• 70mm throttle body flange opening
• Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
• Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.