FREE Shipping on orders over $125*

Performer-Plus Camshaft Kit for 1976-95 Small-Block Chevrolet

$382.95
Edelbrock part #3702 Performer-Plus camshaft is designed for small-block Chevy 305-350 T.B.I & LG-4 V-8. This Edelbrock cam kit produced 245 ft-lbs. of torque when used with #3701 intake and stock iron cylinder heads on a 350 engine.
In stock
SKU
3702
The Edelbrock Performer-Plus #3702 is designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #3702 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions.

Installation Notes:
• Designed for 1957-86 small-block Chevrolet
• 50-state legal E.O. #D-215-19 for 1957-86 small-block Chevrolet.
• Produces 395 ft.-lbs. when matched with #2101 intake and stock heads.
More Information
Part Type Engine Camshaft and Lifter Kit
Manufacturer Edelbrock
Engine Manufacturer Chevrolet
Engine Family Name Small-Block
Engine Size 305 (5.0L), 350 (5.7L)
Application Application Specific
UPC 085347037025
Series Performer-Plus
Grade Type Performance
Lifter Materials Hardened Steel
Computer Controlled Compatible Yes
Intake Duration at .050 Inch Lift 194 deg
Warranty 12 Months
RPM Operating Range 1500-5500 RPM
Emissions Code
EO Number: D-215-19
Application Summary Chevrolet:Small-Block Gen I:305 (5.0L)/350 (5.7L)
Hazardous Materials Warning WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Advertised Intake Duration 244 deg
Advertised Exhaust Duration 264 deg
Intake Valve Lift 0.398 in
Lifter Type Hydraulic
Lobe Separation 112 deg