Skip to the beginning of the images gallery

Torker II 302 Intake Manifold Small-Block Ford

$409.95

Edelbrock Torker II 302 Intake Manifold for Ford 289-347 Small-Block V8

In stock

SKU

5021

Details

Edelbrock Part # 5021 Torker II 302 intake manifold is designed for street 289-302 c.i.d. Ford V8's. Will not fit Boss 302. Manifold not equipped with EGR. Will not fit 255 c.i.d. Ford V8 engines. Not for heavy vehicles. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.

PRODUCT SPECS

More Information
Part Type	Engine Intake Manifold
Manufacturer	Edelbrock
Engine Manufacturer	Ford
Engine Family Name	Small-Block Windsor
Engine Size	289 (4.7L), 302 (5.0L)
Application	Application Specific
UPC	085347050215
Series	Torker/Torker II
Material	Aluminum
RPM Operating Range	2500-6500 RPM
Gasket Or Seal Included	No
Vehicle Model	Ford
Warranty	12 Months
Emissions Code
Application Summary	Ford:Small-Block Windsor:260 (4.3L)/289 (4.7L)/302 (5.0L)
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Will not fit 255 c.i.d. Ford V8 Recommended intake gasket: Edelbrock # 7220. Manifold height: A-4.00", B-5.18" Carb pad height: 4.59" Carb recommendations: Edelbrock AVs2 or Performer Series 600-800 cfm. For automatic transmissions use # 1483 and # 1490 or # 1844. Port exit dimensions: 1.03" x 1.93" Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS. Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Satin
Rear Maximum Height	5.180 in
Single Or Dual Plane Type	Single