Skip to the beginning of the images gallery

Long Block #46755 GM LT1 Gen V 416, Performer RPM Head, 1-Piece Rear Main

$19,412.95

Edelbrock part #46755 long block features a GM aluminum LT1 block with a forged and balanced Manley crankshaft, forged Manley H-Beam connecting rods and Manley forged aluminum pistons to create a 416 c.i.d LT1 stroker.

TEMPORARILY OUT OF STOCK

SKU

46755

Details

Edelbrock part #46755 LT1 416 Long-Block is the base for our LT1 416 Supercharged crate engines. It features a GM aluminum LT1 block with a forged and balanced Manley crankshaft, forged Manley H-Beam connecting rods and Manley forged aluminum pistons to create a 416 c.i.d. LT1 stroker. Its compact design allows for a seamless swap into most platforms; eliminating the need for modifications to your engine bay or hood. This long-block is a great foundation for starting any high performance forced induction LT1 based build. Specifications: Displacement: 416 c.i.d. (4.065" bore x 4.000" stroke); Rods: Forged H-Beam; Camshaft: 243 Deg /254 Deg , .660/.651, 114 LSA; Rocker Arms: GM LT1 Gen V; Compression: 10.5:1; Induction: R2650 Supercharger System; Block: GM LT1 Gen V; aluminum; Cylinder Heads: Edelbrock Performer RPM #77119; Crankshaft: Forged 4340; Pistons: Forged Aluminum -20cc; Warranty: 2-year / Unlimited mileage; Long Block only. Does not come with an induction system

PRODUCT SPECS

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347467556
Quantity	Sold Individually
Wiring Harness Included	No
Main Bearing Cap Bolt Quantity	4-Bolt
Availability Note	Built to Order
Warranty	24 Months
Horsepower	N/A
Type	GM LT1 Gen V (Long Block Only)
Camshaft Type	243deg/254deg, .660/.651, 114 LSA
Rocker Arm Type	LT1
Carburetor Choke Type	N/A
Carburetor Type	Not Included
Rocker Arm Ratio	GM OEM
Spark Plugs Included	No
Intake Manifold Type	Not Included
Oil Filter Included	Yes
Rear Main Seal Type	1-Piece
Valve Cover Material	Cast Aluminum
Hardware Included	Yes
Manifold Material	N/A
Plug Wire And Boot Included	No
Compression Ratio	10.6:1
Construction Type	Assembled
Flywheel Included	No
Cylinder Head Type	Performer RPM
Piston Type	Forged Aluminum
Timing Cover Included	Yes
Cylinder Head Material	Aluminum
Valve Cover Included	Yes
Harmonic Balancer Included	Yes
Air Cleaner Type	Conical
Distributor Included	No
Throttle Body Included	No
Displacement	416 cid
Oil Pan Included	Yes
Water Pump Included	No
Engine Block Material	Cast Iron
Torque	N/A
Calibration	No
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Chromium, Lead, and Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Oil pan dimensions: 2.625" tall at the front, sump measures 6.75" (front) to 7.75" (rear) high and 7.75" in length.; Your engine is supplied with Edelbrock Break-In Oil in the crate. Before starting engine, you will need to prime the oil system. Do not turn engine over with starter motor for priming.
Universal Or Specific Fit	Specific
Valve Cover Type	OEM, Black Powder Coated