Skip to the beginning of the images gallery

Crate Engine #46750 GM LS3 Gen V 416, Supercharged, 720 HP, 695 ft-lbs

$30,022.95

Edelbrock part #46750 Supercharged LS 416 crate engine is a complete 416 c.i.d. supercharged, LS engine, that produces an astounding 720 horsepower and 695 ft-lbs. of torque, on 91 octane pump gas

TEMPORARILY OUT OF STOCK

SKU

46750

Details

Edelbrock part #46750 Supercharged LS 416 crate engine produces an astounding 720 horsepower and 695 ft-lbs. of torque. The foundation of this engine is a brand new, aluminum LS3 block with a forged and balanced Manley crankshaft, forged Manley H-Beam connecting rods and Manley forged aluminum pistons. This engine features an Edelbrock supercharger with Eaton TVS 2300cc/rev rotors. Also included are the essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well as fuel rails, 60 lb./hr. fuel injectors, mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver's side throttle body orientation for ease of intake routing and a Corvette belt offset. Pair with universal heat exchangers for a complete installation. Engine Specifications: Displacement: 416 c.i.d.; Bore: 4.065in; Stroke: 4.000 in; Horsepower: 720 hp; Torque: 695 ft-lbs.; Compression: 9.5:1; Block: LS3 Aluminum Crankshaft: Forged; 4340; Pistons: Forged Aluminum - 18cc; Rods: Forged H-Beam; Camshafts: 215 Deg /247 Deg , .629/.656, 121 LSA; Rocker Arms: LS3, 1.7 ratio; Induction: Supercharger System #1540; Cylinder Heads: GM with Edelbrock Valve Springs #5768; Finish: Black powder coated; Warranty: 2-year / Unlimited mileage; Suggested Fuel: 91 octane pump gas.

PRODUCT SPECS

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347467501
Grade Type	Performance
Quantity	Sold Individually
Wiring Harness Included	Yes
Main Bearing Cap Bolt Quantity	4-Bolt
Availability Note	Built to Order
Warranty	24 Months
Horsepower	720 HP
Type	GM LS3 Gen V
Camshaft Type	215deg/247deg, .629/.656, 121 LSA
Rocker Arm Type	LS3
Outside Pulley Diameter	Stock
Carburetor Choke Type	N/A
Carburetor Type	Not Included
Rocker Arm Ratio	1.7:1
Fuel Injectors Included	Yes
Induction Type	Supercharged
Spark Plugs Included	No
Intake Manifold Type	EFI
Oil Filter Included	Yes
Rear Main Seal Type	1-Piece
Valve Cover Material	Cast Aluminum
Hardware Included	Yes
Manifold Material	Aluminum
Plug Wire And Boot Included	Yes
Compression Ratio	9.5:1
Construction Type	Assembled
Flywheel Included	No
Cylinder Head Type	GM LSA With Edelbrock Valve Springs #5768
Piston Type	Forged Aluminum
Timing Cover Included	Yes
Cylinder Head Material	Aluminum
Valve Cover Included	Yes
Harmonic Balancer Included	Yes
Air Cleaner Type	Conical
Distributor Included	No
Throttle Body Included	Yes
Displacement	416 cid
Oil Pan Included	Yes
Water Pump Included	Yes, Standard
Engine Block Material	Cast Iron
Torque	695 ft-lb
Rotor Type	Eaton TVS 2300, Black Powder Coated
Calibration	Yes
Alternator Included	Yes
ECU Included	Yes
Power Steering Pump Included	Yes
Idler Pulley Included	Yes
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Chromium, Lead, and Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	This engine package includes an Edelbrock prepped long block supercharger, complete engine wiring harness, pre-programmed ECU, electronic throttle pedal, MAFS, throttle body, ignition coils and heated oxygen sensors. This engine is tuned and ready to run right-out-of-the-crate, making it ideal for any project vehicle desiring an LS3 high Performance solution. Your engine is supplied with Edelbrock Break-In Oil. Before starting engine, you will need to prime the oil system. Do not turn engine over with starter motor for priming.
Pulley Belt Width	Stock
Universal Or Specific Fit	Specific
Valve Cover Type	OEM, Black Powder Coated