Super Victor Chrysler 440 Max Wedge Intake Manifold for 4500 Series Carb

The Edelbrock Super Victor 440 Max Wedge #2893 intake manifold is designed for 413-440-500+ RB with Max Wedge heads and 4500 Series carburetors. For competition and high-rpm 413-426-440 c.i.d. Chrysler V8's, the Super Victor 440 #2893 has an all-new runner design that delivers maximum power from 3500 to 8000 rpm in drag race applications. Super Victor 440 Max Wedge #2893 intake manifold is designed to fit 1962-64 Max Wedge heads or the Edelbrock Victor Max Wedge cylinder heads #77939 and #77949 for maximum performance. The manifold port exits are CNC machined to 1.30" x 2.58". The #7798 valley cover is required when used with Edelbrock Victor Series cylinder heads. Whether you're building a daily driver, ultra high-performance street machine or race car, an Edelbrock intake manifold will provide the power right where you want it. The Edelbrock Super Victor 440 Max Wedge #2893 also features a natural aluminum finish for a classic look. For the ultimate "Made in USA" quality, every Edelbrock intake manifold is cast and machined in the USA.

Installation Notes:
• Mopar Performance P/N P5249643, Fel-Pro #1218 or equivalent 2.63" x 1.34" for an area of 3.52 sq. inches. Custom gasket trimming is needed if larger area is desired.
• Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
• Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.