Free Shipping on all orders over $50* Learn More

RPM Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet Cam

$1,192.50
The Edelbrock #60899 Performer RPM cylinder heads are designed for 1955-86 SB Chevy engines. The Edelbrock #60899 Performer RPM heads are perfect for street performance, daily drivers and muscle cars where performance is needed.
In stock
SKU
60899
The Edelbrock #60899 Performer RPM cylinder heads are designed for 1955-86 Small-Block Chevy applications. The Edelbrock #60899 Performer RPM heads are perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. These cylinder heads deliver great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

INSTALLATION NOTE:
• EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC FLAT TAPPET CAMSHAFT APPLICATIONS
• Match with Edelbrock head gasket sets.
• To use stock rockers on small-block Chevy heads, .100" longer than stock pushrods are required. Edelbrock pushrods #9629 are recommended.
• Use Head Bolt Kits for easy installation. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat.
• S/B Chevy heads may not be used on engines with less than 4" bore (262, 265, 283, 305, 307 c.i.d.) except with cams having less than .450" valve lift.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347608997
Series Performer RPM
Material Aluminum
Grade Type Performance
Quantity Sold Individually
Guide Plate Material Hardened Steel
Camshaft Type Flat Tappet
Horsepower 350-450 HP
Availability Note Available to Order
Warranty 12 Months
Seat Angle Exhaust 45 deg/Intake 45 deg
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Intake Valve Diameter 2.02 in
Intake Runner Volume 195 cc
Push Rod Diameter (Suggested) 0.3125 in
Rocker Stud Diameter 0.375 in
Valve Angle 23 deg
Valve Spring Diameter 1.46 in
Valve Spring Maximum Lift 0.575 in
Valve Stem Diameter 0.3438 in