Skip to the beginning of the images gallery

Performer RPM Ford FE 390 Intake Manifold

$689.95

Edelbrock Performer RPM 390 Intake Manifold for 1958-1976 Ford 332-428 FE Big-Block V-8

TEMPORARILY OUT OF STOCK

SKU

7105

Details

Edelbrock Part # 7105 Performer RPM FE intake manifold is designed for high-performance street 390-406-410-427-428 c.i.d. Ford FE V8's with standard 390-428 c.i.d., 427 low/medium-rise or Edelbrock Performer RPM FE heads. The dual-plane constant cross-sectional area design builds low and mid- range acceleration while optimized runner paths make exceptional top-end horsepower. Has provision for adding the PCV or breather flange at rear. No exhaust crossover passage.

PRODUCT SPECS

More Information
Part Type	Engine Intake Manifold
Manufacturer	Edelbrock
Engine Manufacturer	Ford
Engine Family Name	FE
Engine Size	390 (6.4L), 406 (6.7L), 410 (6.7L), 427 (7.0L), 428 (7.0L)
Application	Application Specific
UPC	085347071050
Series	Performer RPM
Material	Aluminum
Finish	Satin
RPM Operating Range	1500-6500 RPM
Gasket Or Seal Included	No
Vehicle Model	Ford
Warranty	12 Months
Emissions Code
Application Summary	Ford:FE:332 (5.4L)/352 (5.8L)/360 (5.9L)/390 (6.4L)/406 (6.6L)/410 (6.7L)/427 (7.0L)/428 (7.0L)
Hazardous Materials Warning	WARNING: This product contains chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock # 7224 Manifold height: A-4.89", B-6.04" Carb pad height: 5.46" Carb recommendations: Edelbrock Thunder Series AVS or Performer Series 650-800 cfm. For automatic transmissions use # 1483 or # 1844 Port exit dimensions: 1.16" x 1.97" Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS. Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Rear Maximum Height	6.040 in
Single Or Dual Plane Type	Dual