Skip to the beginning of the images gallery

Performer RPM Big Block Ford 460 Intake Manifold

$476.95

Edelbrock Performer RPM 460 Intake Manifold for Ford 429/460 Big-Block V8

In stock

SKU

7166

Details

Edelbrock Part # 7166 Performer RPM 460 intake manifold is designed for high-performance street 429/460 Ford V8's with standard or Cobra-Jet cylinder heads. Latest technology in dual-plane design results in excellent low- and mid-range torque and outstanding horsepower on appropriately equipped engines. Will accept square-bore or spread-bore carburetors. Will not fit 1988 and later models. Note: Early Cobra-Jets came with Quadrajets.

PRODUCT SPECS

More Information
Part Type	Engine Intake Manifold
Manufacturer	Edelbrock
Engine Manufacturer	Ford
Engine Family Name	Big-Block
Engine Size	429 (7.0L), 460 (7.5L)
Application	Application Specific
UPC	085347071661
Series	Performer RPM
Material	Aluminum
Finish	Satin
RPM Operating Range	1500-6500 RPM
Gasket Or Seal Included	No
Vehicle Model	Ford
Warranty	12 Months
Emissions Code
Application Summary	Ford:Big-Block:429 (7.0L )/460 (7.5L)
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock # 7223 or Fel-Pro # 1230/# 1231 Manifold height: A-4.81", B-6.15" Carb pad height: 5.48" Carb recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. For automatic transmission use # 1483 and # 1495 or # 1844. Port exit dimensions: 1.76" x 2.06" Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS. Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Rear Maximum Height	6.150 in
Single Or Dual Plane Type	Dual