Skip to the beginning of the images gallery

Performer EGR AMC Intake Manifold

$509.95

Edelbrock Performer EGR AMC Intake Manifold for AMC 304-360-401 Small-Block V8

In stock

SKU

3731

Details

Edelbrock Part # 3731 Performer AMC EGR intake manifold is designed for 1970-91 street 304-360-401 c.i.d. V8 engines. This intake manifold will not accept stock Motorcraft spread-bore carburetor.

PRODUCT SPECS

More Information
Part Type	Engine Intake Manifold
Manufacturer	Edelbrock
Engine Manufacturer	AMC
Engine Family Name	Gen II V8
Engine Size	304 (5.0L), 360 (5.9L), 401 (6.6L)
Application	Application Specific
UPC	085347037315
Series	Performer
Material	Aluminum
Finish	Satin
RPM Operating Range	Idle-5500 RPM
Gasket Or Seal Included	No
Vehicle Model	AMC
Warranty	12 Months
Emissions Code
Application Summary	AMC:-:304 (5.0L)/360 (5.9L)/401 (6.6L)
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Fel-Pro MS96011 Must use factory style metal valley tray Manifold have two center bolt holes offset Manifold height: A-4.20", B-5.50" Carb pad height: 4.85" Carb recommendations: Requires Edelbrock # 8008 or # 8024 stud, nut and washer kit. OEM 4-Bbl non-EGR square-bore. Edelbrock AVS2 or Performer Series 500-650 cfm. Port exit dimensions: 1.03" x 2.07" Edelbrock bracket # 8034 required for 1979 and later vehicles Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS. Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Rear Maximum Height	5.500 in
Single Or Dual Plane Type	Dual