Skip to the beginning of the images gallery

Performer 440 Intake Manifold for Chrysler, RB Series 413-440 Engines

$379.95

Edelbrock Performer 440 Intake Manifold for Chrysler "RB" 413-426-440 V8's. Accepts OEM 4-bbl or 4150-Style Square-Bore Carburetors; Non-EGR. Works with EGR for 1972-79 440 V8s with OEM 4-bbl. carb. Will not fit 1962-64 Max Wedge Heads

TEMPORARILY OUT OF STOCK

SKU

2191

Details

Edelbrock Part # 2191 Performer 440 intake manifold is designed for street 413-426-440 c.i.d. Chrysler V8's that measure 8.75" across block. Will not fit 1962-64 Max Wedge heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

PRODUCT SPECS

More Information
Part Type	Engine Intake Manifold
Manufacturer	Edelbrock
Engine Manufacturer	Chrysler / Dodge / Plymouth
Engine Family Name	RB Engine
Engine Size	413 (6.8L), 426 (7.0L), 440 (7.2L)
Application	Application Specific
UPC	085347021918
Series	Performer
Material	Aluminum
Finish	Satin
RPM Operating Range	Idle-5500 RPM
Gasket Or Seal Included	No
Vehicle Model	Chrysler
Warranty	12 Months
Emissions Code
Application Summary	Chrysler:Big-Block RB-Series:413 (6.8L)/426 (7.0L)/440 (7.2L)
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: # 7225 Manifold height: A-3.80", B-4.80", measured to engine block Carb pad height: 4.30" Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 650-800 cfm. Use # 1481 or # 1483 throttle/transmission lever kit. Port exit dimensions: 1.12" x 2.14" May require different EGR valve, see installation instructions Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS. Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual