FREE Shipping on orders over $125*
Toggle Nav
Inline Fuel Pump & Regulator Kit (Electric Fuel Pump #3594 & Regulator #1728)
$299.95
Edelbrock part #35943 kit will include the in-line electric fuel pump #3594 which provides 67 GPH at 43.5 psi and the #1728 Fuel pressure regulator.
In stock
SKU
35943
Edelbrock part #35943 kit will include the in-line electric fuel pump # 3594 which provides 67 GPH at 43.5 psi and the #1728 Fuel pressure regulator. The fuel pump will include mounting hardware and it will come with 3/8 barbed fittings. Russell fittings allow the customer to use -6 AN fitting (Russell part #670470) if desired. This kit will support up to 670 horsepower @ 43.5 psi.
| Part Type | Electric Fuel Pump |
|---|---|
| Manufacturer | Edelbrock |
| Application | Universal |
| UPC | 085347359431 |
| Gasket Or Seal Included | Yes |
| Quantity | Sold Individually |
| End 2 Type | Threaded |
| End 1 Type | Threaded |
| Mounting Bracket Included | Yes |
| Pump Design | In-line Electric Fuel Pump |
| Terminal Gender | Male |
| Pump Type | Electric |
| Gasket Or Seal Material | Copper |
| Connector Gender | Male |
| Wiring Harness Included | No |
| Fuel Sending Unit Included | No |
| Negative Ground | Yes |
| Strainer Included | No |
| Seal And Lock Ring Included | No |
| Terminal Type | Threaded |
| Connector Shape | Round |
| Outlet Thread Diameter | 0.393701 in |
| Terminal Quantity | 2 |
| Wire Quantity | 2 |
| Voltage | 12 VDC |
| Type | Electric |
| End 2 Gender | Female |
| End 1 Gender | Female |
| Minimum Pressure | 35 PSI |
| Fuel Pump Inlet Type | Hose Barb |
| Maximum Amperage Draw | 10 A |
| Maximum Horsepower | Supports Up To 670 |
| Warranty | 12 Months |
| Emissions Code | N/A |
| Hazardous Materials Warning |
 WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Inlet Fitting Thread Size | 10mm x 1 |
| Inlet Thread Diameter | 0.393701 in |
| Inlet Type | Hose Barb |
| Internal Or External | External |
| Maximum Pressure | 90 PSI |
| Outlet Fitting Thread Size | 10mm x 1 |
| Outlet Outside Diameter | 0.375 in |
| Outlet Quantity | 1 |
| Outlet Type | Hose Barb |
| Regulator Included | Yes |
| Universal Or Specific Fit | Universal |
