Lunati HOT Summer Deals on Valve TrainShop Now

Max-Lift™ BSR Shaft Rocker System for Aftermarket LS3-Style Cylinder Heads

$696.95
Max-Lift BSR Shaft Rockers for Aftermarket LS3-style cylinder heads single-shaft design increases valve train stiffness, durability, and lift to .675", while improving dynamics. Tri-layer bushings and plasma-nitride finish reduces friction.
TEMPORARILY OUT OF STOCK
SKU
1980-16
COMP Cams® expands upon its Max-Lift™ BSR Shaft Rocker Systems to include aftermarket LS3-style cylinder heads. This new bolt-in, bushed shaft rocker system is specifically designed for aftermarket LS3 heads where valve geometry is different from the stock configuration.

By tying all eight rockers onto a single shaft, the BSR Series of rockers improves valve train dynamics by increasing valve train stiffness. Replacing the high-Hertz loading needle bearings with tri-layer bushings reduces deflection, allowing for increased rigidity and decreased rocker pad wear. The plasma-nitride finish minimizes friction and increases durability, while provisions for optional pressurized oiling further improve longevity and performance. The increased valve train stiffness provided by the COMP Cams Max-Lift BSR Shaft Rocker System makes the same camshaft perform like a slightly larger camshaft as more of the lobe lift is transferred directly to the valve train instead of being absorbed by deflection in the cylinder head and single-bolt rocker mounting design.

The system will also allow the use of higher-lift, more aggressive camshafts before the valve train goes out of control. The Max-Lift BSR Shaft Rocker System ensures the rocker pad and valve tip remains parallel through the contact sweep, allowing the rocker to safely sweep up to .675” valve lift. The Max-Lift BSR Shaft Rockers System for aftermarket LS3-style heads will fit RHS 54550 Pro Elite LS3, Edelbrock Victor CNC LS3, Trick Flow 255 LS3, AFR Mongoose LS3, and Mast Black Label LS3

    Features and Benefits
  • Increase Valve Train Stiffness - Reduced deflection of the entire system by tying all 8 rocker arms together on a single shaft while also improving valve train dynamics. Reduced deflection also by using a thin, tri-layer bushing instead of needle bearings which deflect under high load. Increasing the valve train stiffness will make the same camshaft perform like a slightly larger camshaft as more of the lobe lift is transferred directly to the valve instead of being absorbed by deflection in the cylinder head and single bolt rocker mounting strategy. The COMP LS Bushed Rocker Shaft System will also allow the use of a more aggressive camshaft before the valve spring goes out of control.
  • Improved Durability - The COMP LS Bushed Rocker Shaft System will perform reliably for a longer period of time than the single stock needle bearing trunnion by eliminating the high Hertz loading that is present in needle bearing trunnions and increasing rigidity of the valve train system. Deflection of the rocker arms is reduced, especially in LS3 and LS7 applications with offset intake rockers. The rocker pad remains parallel to valve tip reducing wear on both components.
  • Increased Valve Lift - By increasing the valve train stiffness , the COMP LS Bushed Rocker Shaft System allows the stock rocker to achieve higher lift potential than the stock single bolt rocker trunnion. The bushed shaft ensures that the rocker pad and valve tip remain parallel through the contact sweep by decreasing deflection of the stock single bolt pedestal. This allows the rocker to sweep to higher lift values before running off the valve tip.
More Information
UPC 00036584417859
Manufacturer COMP Cams®
Emissions Code
Rocker Arm Ratio 1.7