Lunati HOT Summer Deals on Valve TrainShop Now

Dual-Quad Hemi Gen II EFI Intake Manifold

Edelbrock Dual-Quad Chrysler Gen II 426-572 HEMI EFI Intake Manifold
In stock
Edelbrock Part # 75245 Dual-Quad HEMI EFI intake manifold is intended for use with Mopar Gen II (1964-71) 426-572 HEMI engines operating in the 2,500 to 6,500+ range. This new intake manifold is a single-plane Air-Gap design with a dual square-bore 4150 style throttle body pad. Throttle body spacing and height are the same as Mopar Performance dual-quad #P5153737, making it a direct bolt-on to all vehicles with a shaker hood. The Dual-Quad HEMI is compatible with factory style cylinder heads, but optimized for use with Edelbrock Victor Jr. HEMI cylinder heads. Requires Edelbrock Coil Bracket #8079 for use with OE style coils.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347752454
Series Dual-Quad/Multi Carb
Gasket Or Seal Included No
Vehicle Model Chrysler
Availability Note Available to Order
Warranty 12 Months
RPM Range 2500-6500 RPM
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit
Installation Notes
  • Recommended intake gasket: Edelbrock #7278
  • Manifold height: A-4.68", B-5.51"
  • Carb pad height: 5.10"
  • Port exit dimensions: 1.80" x 1.98"
  • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
  • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish Satin
Material Aluminum
Rear Maximum Height 5.510 in
Single Or Dual Plane Type Single