All of the calibration tables, as well as the data log viewer, make use of "dashboards".  A dashboard is a group of sensors such as RPM, manifold pressure, coolant temperature, etc. that provide feedback on various engine operating parameters.  Dashboards can be seen on the bottom of every calibration table window while online with the ECU.  There is also a "Main Dashboard" display which can contain up to 48 sensors and is viewed in a separate window.  There are 15 available dashboard configurations available for use in a calibration table window.  These dashboards can each display up to 14 sensors.

• To select a dashboard to display from within any of the calibration tables, simply right-click anywhere in that window and choose SELECT DASH and make your selection.
  
  
  
• To change the content of any of the dashboards, select FILE/DASHBOARD SETUP from the pulldown menu.
  
  
  
• From the dropdown menu at the top of the dashboard setup window, select which dashboard you want to edit.
  
  
  
• You may change the name of the dashboard by clicking the "Edit" button to the right of the selector.
  
  
  
• A list of sensors currently used in this dashboard will appear at the right, and a list of available sensors will appear at the left.
  
  To remove a sensor from the dashboard, highlight that sensor on the right and click the REMOVE button.  (Clicking REMOVE ALL will remove all sensors from the dashboard.)  To add one of the available sensors, select that sensor from the left and click the ADD button.  Each dashboard, with the exception of the main dashboard, can contain up to 14 sensors.
  
  
• When you are finished making changes, click the SAVE button to finalize your changes.  Click the ABORT button if you wish to exit Dashboard setup without saving your changes.