 |
|
THE TRUTH ABOUT FUEL INJECTORS
FAST Precision-Flow™ fuel injectors deliver the outstanding idle quality, unparalleled flow consistency, and unrivaled durability essential for high-performance EFI engine applications. Engineered to yield faster throttle response, reduced clogging, and superior fuel atomization, Precision-Flow™ fuel injectors are manufactured to the tightest tolerances in the industry and are flow certified to ensure consistent performance. And with a full range of both low and high impedance injectors with fuel delivery rates ranging from 19 to 160 lb/hr, FAST™ can cover any application, street or race!
|
-
State-of-the-art magnetics improve injector opening times for faster throttle response
-
Precision ground pintle and wide spray angle delivers superior fuel atomization
-
Redesigned valve body resists clogging and improves hot starting
-
High-impedance injector models available up to 60lb/hr for trouble-free OEM computer compatibility
-
Low-impedance* injectors available up to 160 lb/hr for maximum performance with aftermarket EFI systems, such as the FAST™ XFI™ system
*Note: low-impedance injectors can not be used with OEM computers
Think FAST™ for all of your fuel injector needs
FAST™ offers a fuel injector for virtually any application that you can think of. The following chart will provide a general guideline as to what you should be looking for in an injector flow volume based on your expected engine output. NOTE: fuel injectors in and of themselves do nothing to produce power, so don’t make the mistake of selecting a larger injector than you need because of the peak horsepower rating of the injector –selecting too large of an injector will waste fuel and hurt your throttle response, much like overcarbureting a non-injected engine would do. Select the right injector to support the power that your engine produces -you’ll never run out of fuel, and you’ll experience great throttle response, a smooth power curve, and good fuel economy.
Low impedance VS high impedance –which do you need?
FAST™ offers fuel injectors in both low and high impedance versions to cover all of your EFI performance needs. So which is the correct impedance to run? As a general rule, you will need to run high-impedance injectors whenever you retain your factory Engine Control Unit (ECU). Failure to use high-impedance injectors with a factory EFI computer will cause severe damage to the ECU, necessitating a costly replacement computer. FAST™ offers high-impedance injectors up to 60 lb/hr, so we’ve got you covered for nearly any performance scenario where you would still want to use your factory computer.
If you are running an aftermarket ECU, such as the FAST™ XFI™ system, low-impedance injectors are the way to go. FAST™ offers a full range of all of the injectors that you’ll ever need to cover any performance scenario -from boulevard cruiser to dragstrip dominator.
Need more information about fuel injectors? Contact our EFI HELP™ specialists at (877) 334-8355 for some expert advice.
|